WHITAKER LABORATORY, INC.
2500 Tremont Road  -  Savannah, Georgia 31405
(912) 234-0696  Fax (912) 233-5061
Geotechnical Engineering, Testing & Environmental Consultants

Our Services

•  Quick Overview:         Environmental Consulting      Construction Materials Testing

  ---

• CPT  Cone Penetrometer Testing                 
•  Windsor Pin Mortar Strength Testing 

A GA DOT 
Certified Laboratory 

  SOILS:

• Soil Proctor Tests

• Field Density Tests - Sand Cone, Drive  Cylinder and Nuclear

• Consolidation Tests

• Unconfined Compression Tests

• Atterberg Limits

• Mechanical and Grain Size Analysis

• Level III Soil Surveys

• Plate Load Tests

• Percolation Tests (Modified Taft Procedure)

• California Bearing Ratio Tests

• Specific Gravity

• Soil-Cement Design and Tests

• Test Borings and Sampling

• Foundation Analysis and Design

• CPT - Cone Penetrometer Testing
  (Direct Push)

• Seismic Shear Wave Analysis

  CONCRETE:

• F-Factor Floor Profiling    

• Compression Tests of Cylinders

• Flexural Tests of Beams

• Concrete Design Mixes

• Diamond Drilling and Core Tests

• Slump, Air and Yield Tests

• In-Place testing by Swiss Hammer or Windsor Probe

• Sampling and Molding

• Aggregate Tests

• Penetration Resistance Testing

• Relative Humidity - moisture testing of concrete slabs

  MASONRY  TESTS: 

• Compression Tests on Mortar

• Test Blockfill Grout

• Sampling & Testing Masonry Units

• Compression Tests on Masonry Units

• Constructing & Testing Masonry Prisms

• Strength Evaluation of Historical Mortar

• In-Place Testing of Mortar

ENVIRONMENTAL:

• SBA 501 Environmental Site Assessments

• Preliminary Site Inspections (TSA/ESI)

• Phase I Assessments

• Phase II Assessments

• Fuel Contamination Sceenings & Assessments

• Level III Soil Testing & Septic System Investigations

• Mold Screenings & Assessments

• Asbestos Screenings & Assessments

• Lead Based Paints

BITUMINOUS  MATERIALS:

• Aggregate Tests

• Marshall Stability Tests

• Mix Designs

• Extractions and Gradations

• Diamond Coring for Thickness and Density

METALS:

• Radiography

• Ultrasonic Evaluations

• Magnetic Particle Inspection

• Visual Inspection

• Welding Inspections

MISCELLANEOUS:

• Pile Dynamic Analysis

• Pile Load Tests

• Pile Driving Inspection

• Paint Film Thickness

• Rebar Locating

• NPDES Inspections

• Septic Tank Investigations